Senior Propulsion Development Engineer, Test Stand

Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.

OUR MISSION

True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.

OUR VALUES

• Be the offset. We create asymmetric advantages with creativity and ingenuity.
• What would it take? We challenge assumptions to deliver ambitious results.
• It’s the people. Our team is our competitive advantage and we are better together.

YOUR MISSION

As a Senior Propulsion Development Engineer at True Anomaly, you will be the hands-on design and build lead for the ground systems and facility infrastructure that make our new Denver Front Range propulsion test stand operational. You will create detailed designs for hypergolic propellant feed systems, GSE, fluid system plumbing, structural hardware, and supporting facility systems — then see those designs through fabrication, installation, and commissioning. Working with highly toxic and reactive propellants demands an uncompromising approach to design rigor and safety, and you will help design the systems that meet that standard for the facility. This is a builder's role: you will leave a lasting mark on a test capability that will power True Anomaly's propulsion programs for years to come. 

RESPONSIBILITIES

Hypergolic System Design 

• Lead the detailed mechanical design of hypergolic propellant feed systems, including propellant storage vessels, transfer lines, fill and drain assemblies, valve configurations, and pressurization circuits for a new test stand. 
• Select fluid system components and assemblies compatible with hypergolic propellants (NTO, MMH, UDMH, or similar), including sizing, material selection, seal compatibility, leak containment, and pressure ratings. 
• Develop and own P&IDs for hypergolic propellant and pressurant systems; ensure designs incorporate appropriate redundancy, isolation, and emergency safing capabilities. 
• Design propellant offload, storage, and transfer infrastructure including secondary containment, vent and drain routing, and neutralization provisions. 
• Integrate hypergolic system designs with fire suppression, facility exhaust and scrubbing systems, personnel protection provisions, and facility control interfaces. 
• Apply and enforce applicable design standards and material compatibility requirements throughout all hypergolic system designs. 

Test Stand Structural & Mechanical Design 

• Design the primary test stand structure including thrust measurement systems, engine/thruster mount interfaces, and load paths for anticipated thrust levels and dynamic loads. 
• Detail mechanical designs for run tank assemblies, GSE carts, propellant conditioning systems, and ancillary facility hardware. 
• Produce fully detailed CAD models and engineering drawings suitable for fabrication, procurement, and third-party review. 
• Conduct or coordinate structural and pressure system analyses including FEA, pressure budget calculations, and proof and burst margin verification. 
• Design for maintainability, access, and operational safety — ensuring that technicians can safely configure, operate, and service all systems. 

Fabrication, Procurement & Build 

• Develop fabrication packages including drawings, material specifications, weld and joining requirements, and acceptance criteria for test stand hardware. 
• Identify and qualify vendors for fabricated components, pressure vessels, specialty valves, instrumentation, and other long-lead hardware; provide technical oversight throughout procurement. 
• Support and oversee the fabrication, assembly, and installation of designed systems; resolve fabrication anomalies and nonconformances. 
• Define and execute acceptance test requirements for delivered hardware, including proof pressure testing, leak checks, and functional verification. 
• Develop GSE and tooling needed to safely handle, install, and service hypergolic system components. 

Safety & Compliance 

• Serve as the design authority for hypergolic system safety features; ensure all designs comply with applicable OSHA, EPA, NFPA, and DoD standards for toxic and reactive propellant handling. 
• Contribute to facility hazard analyses (PHA, FMEA) and support development of operating procedures from a design perspective, ensuring procedures accurately reflect as-built system configuration. 
• Coordinate with local authorities having jurisdiction (AHJ), fire marshal, and environmental regulators on facility design reviews and permitting requirements related to hypergolic propellant storage and operations. 
• Establish and document material compatibility requirements and cleaning and passivation standards for all wetted components. 

Operational Test Support 

• Lead the mechanical commissioning of hypergolic facility systems, including system cleanliness verification, pressure testing, leak checks, and functional checkouts. 
• Maintain as-built documentation throughout facility construction and commissioning; ensure configuration control of all facility systems. 
• Provide ongoing design support during early test operations, including hardware modifications and continuous improvement initiatives.

QUALIFICATIONS

• Bachelor's degree in Mechanical, Aerospace, or Chemical Engineering. 
• 8+ years of professional experience in the design and build of propulsion ground systems, test facility hardware, or high-pressure fluid systems for aerospace or defense applications. 
• Demonstrated hands-on experience designing fluid systems for hypergolic, toxic, or highly reactive propellants, including material compatibility, secondary containment, and emergency safing provisions. 
• Proficiency with 3D CAD tools (NX, SolidWorks, or equivalent) and production of fully detailed engineering drawings for fabrication. 
• Experience developing P&IDs for propulsion or chemical process systems and working with pressure system design codes (ASME B31.3 or equivalent). 
• Solid understanding of pressure system safety requirements including proof, burst, and leak test margins, and relief device sizing. 
• Demonstrated ability to take a design from concept through fabrication, installation, and commissioning. 
• Excellent written and verbal communication skills, including the ability to produce clear technical documentation and interface with safety and regulatory stakeholders. 

PREFERRED SKILLS AND EXPERIENCE

• Direct experience designing and building hypergolic propellant test stands or ground fluid systems for spacecraft or launch vehicle programs. 
• Familiarity with Hydrazine, NTO, MMH, UDMH, or red fuming nitric acid (RFNA) handling systems and the associated material, cleaning, and personal protective equipment requirements. 
• Experience coordinating with AHJs, fire marshals, or environmental regulators on permitting for hazardous chemical storage or operations. 
• Background in structural analysis or FEA for test stand structures and pressure vessels. 
• Familiarity with instrumentation and control system interfaces for propulsion test: pressure transducers, flow meters, thermocouples, automated valve control, and emergency shutdown systems. 
• Experience with cleaning, passivation, and cleanliness verification for hypergolic-compatible fluid systems. 
• Familiarity with Colorado Front Range permitting, zoning, or environmental requirements for toxic propellant storage and operations. 
• Active DoD security clearance (Secret or above), or ability to obtain one. 

COMPENSATION

• Base Salary:  $135,000 to $190,000

• Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave 

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. 

ADDITIONAL REQUIREMENTS

• Work Location—this role will be fully onsite at either our Centennial, CO office location.
• Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
• Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below.

#LI-Onsite 

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us.

Create a Job Alert

Interested in building your career at True Anomaly? Get future opportunities sent straight to your email.

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in True Anomaly’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

• Alcohol or other substance use disorder (not currently using drugs illegally)
• Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
• Blind or low vision
• Cancer (past or present)
• Cardiovascular or heart disease
• Celiac disease
• Cerebral palsy
• Deaf or serious difficulty hearing
• Diabetes
• Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
• Epilepsy or other seizure disorder
• Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
• Intellectual or developmental disability
• Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
• Missing limbs or partially missing limbs
• Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
• Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
• Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
• Partial or complete paralysis (any cause)
• Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
• Short stature (dwarfism)
• Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.